Enhanced power delivery, unique safety features and exhilarating response at your disposal, the Revo Performance Pack delivers much more than peak power figures. Whatever drives you, the Revo Performance Pack has it all. Engineered to perform, only Revo offers a complete tuning solution specifically designed for your vehicle.
 
 
FORM FOLLOWS FUNCTION
The Revo Carbon Series Air Intake system is a direct replacement kit and includes a beautiful carbon lid designed to increase the flow of air by utilising the enlarged diameter outlet and increased volume. The Revo Panel Filter upgrade replaces the restrictive stock paper filter, and a Revo carbon intake pipe allows air to flow smoothly to the turbo from the airbox, resolving the restrictions found during flow testing of the OEM system to improve your engines response and the power it can create.
 
KEY FEATURES
Increases air volume
Enlarged airbox outlet
Smooths airflow and reduces restriction
Direct replacement carbon fibre kit
Proven performance benefits
 
 
REVO PERFORMANCE ECU SOFTWARE
2.5 TFSI DNWA ENGINE
Performance isn’t always achieved by aiming for the biggest peak figures, and certainly not by pushing things too far. Combining the additional airflow gained from the uprated intake system and more efficient cooling from the uprated front-mounted intercooler allowed the Revo calibration team to maximise the increased efficiency from these components and tie them together to give fantastic real-world gains whilst retaining the stock downpipe and GPF/OPF.
Revo Performance ECU Software for the 2.5TFSI transforms how the car can be driven. Out of the box, the RS3 demands attention and respect, and rightly so. With 400PS and 480NM torque, an incredible 5 cylinder soundtrack, less weight than the previous model and impressive acceleration times, all the right ingredients are there.
Intensively tested and refined over twelve months, throttle response has been dialled in to give the driver a deeper sense of connection and involvement with the car, something the stock model seems to lack. Rather than being pulled, the hike in torque gives the feeling of a firm push from the bottom of your back, and it’s addictive. The car now begs to be driven hard, it’s now able to break traction in corners, and dares you to bury your right foot. Optimised power delivery and with much more torque at its disposal, you can now drop below 4000rpm and still pull hard out of any corner without hesitation.
 
SERIAL PORT SWITCH (SPS)
Switchable software for 4 performance modes.1
SPEED LIMIT UNLOCK
The top speed limit for this vehicle has been removed.
COLD START PROTECTION
RPM is limited until safe oil temperature is reached.
LEFT FOOT BRAKING
Left foot braking has been enabled on this vehicle.
TEMPERATURE PROTECTION
Enhanced engine cooling and oil temperature management.
EXHAUST OVERRUN
Enhanced exhaust acoustics and valve control.
 
 
REVO INTERCOOLER
AUDI TTRS 8S 2.5TFSI
The Revo Intercooler utilises unique design features to lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software. The unique end tank profile promotes internal laminar flow by decreasing turbulence and increasing airspeed into the bar and plate core. This enhances charge air cooling giving you access to more power throughout the rev range.
The limitations of the stock intercooler were apparent throughout testing. The stock part consistently struggled to manage charge air temperatures, even under normal driving conditions. The Revo Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures by up to 55ºC vs. the 8S TTRS intercooler, allowing you to drive harder, for longer.
 
KEY FEATURES
Bar & Plate Core Design
Fully Cast End Tanks
OEM Fitment with Integrated Crash bar
Intercooler Pipes Included
Up to 80% Increased Core Volume
Over 55ºC Lower AIT
 
 
TURBOCHARGER INLET
2.5 TFSI AUDI RS3 (8V.2) & TTRS (8S)
Get impressive performance benefits from your 2.5 TFSI engine with the Revo Turbocharger inlet pipe. Replacing the restrictive component with a precisely engineered inlet pipe allows your turbo to breathe freely whilst reducing turbulence and heat transfer.
The 2.5 TFSI engine found in the RS3 8V.2 and TTRS 8S is capable of incredible power gains even with the stock turbocharger. Whilst the stock inlet is fine for stock power, once you start increasing this performance the stock inlet pipe becomes a restriction to airflow and holds back the potential gains. With the Revo turbocharger inlet pipe upgrade, you can achieve maximum performance, due to unique design features and Zirotec © heat-reflective coating. The Revo kit includes a silicone coupler from the inlet to fit onto the Revo Carbon Series Intake and a precision-machined turbo collar at the other end to match the inlet diameter of the stock turbocharger.
 
KEY FEATURES
Reduces airflow restriction by an average of 20%
True 4" inlet diameter
Zircotec© heat-reflective ceramic coating
RHD and LHD fitment
Full cast aluminium precision machined